hassmfg.com
Home |  About |  Help |  Shopping Cart
Search:  

Click to zoom in
Click image to zoom.

ECPV-031-316SS Pinch Valve, 1/32 ID x 3/32 OD tubing

Price: $ 538.00
Add to Cart
Part Number: 1186
Usually ships in: 2-3 weeks
Shipping weight: 6.00 lbs

  • 4-20mA or 1-5VDC control signal
  • Proportional flow control
  • Uses customer-supplied tubing
  • Snap-in design
  • Zero backlash
  • 200 positions over full range
  • Direct drive without gears
  • Interchangeable bodies
  • For 3/32 inch OD tubing

Similar product(s)
ECPV-031B

Accessories
12 Volts DC Power Supply


Description

The ECPV-031-SS Electronically Controlled Pinch Valve is a computer-controlled pinch valve which directly accepts a 4-20 mA or 1-5 VDC control signal. The ECPV accurately controls the flow of high-purity fluids, slurries, and other liquids and gases in pharmaceutical and biotechnology environments.

Customer-supplied tubing is inserted through the valve and connected to the process. The tubing can be snapped in from the side without removing it from the process. The glass-filled teflon rounded pinch element moves in 0.001 inch increments to precisely squeeze the tubing for accurate, proportional control.

High resolution produces outstanding process control. This is achieved by using a 8-bit analog-to-digital converter to process the control signal. A digital filter removes noise from the signal. The microprocessor converts the control signal to a valve position and directs the 200 step per revolution DC step motor to rotate a threaded stem. The pinch element moves up and down on the threaded stem to proportionally pinch the tube.

The ECPV has no backlash and no hysteresis. This greatly simplifies control programs. The valve is opened and closed by a zero-backlash screw mechanism. The step motor is directly connected to the valve without gears. The valve can also be operated manually.

The valve bodies are interchangeable. One valve with 4 bodies can cover the full range of tube sizes. Changeover takes about a minute.

Each valve comes complete with actuator and valve with one body, mounting bracket, and instructions. Power supply, control signal and tubing are not included.

The reliable, low-maintenance design and heavy-duty construction reduce costly downtime.

All Hass Manufacturing products are backed by a five (5) year warranty, free technical support, overnight delivery of repair parts, and a lifetime satisfaction guarantee.


Specifications

CONTROLLER

Type: Single-board microcontroller
Control: Open-loop
Inputs: 4-20 mA current or 1 - 5 VDC voltage for position. Jumper selectable.
Input Impedence:
4-20mA selected: 250 Ohm
1-5 VDC selected: 3300 Ohm
Signal floats and has 1 MOhm isolation from analog circuit
Outputs: None
Modes: Full range, direct acting only
Digital filter on or off via jumper
Adjustment: None
Temperature: 32 F to 120 F (0 C to 49 C)
Humidity: 10 to 80% non-condensing
Enclosure: Stainless steel, general purpose
Power supply: 12-24 VDC, 1.5A (1043 Power Supply recommended)
Power: consumption 23 Watts maximum, 1 Watt typical

ACTUATOR

Type: DC step motor, 200 steps/revolution, 4 revolutions for full stroke
Resolution: 200:1 (0.5%)
Speed: jumper selectable: 60, 75, 100 and 150 steps/second
Torque: 57.5 oz-in peak

VALVE

Type: Pinch,In-line
Tube size: 1/32 ID, 3/32 OD tubing
Stroke: Jumper selectable from 0.035 to 0.286 inch
Stroke time: Jumper selectable from 1.3 to 10.7 seconds
Number of turns: Jumper selectable, 1, 2, 4 or 8 turns, closed to full open
Pressure: Tubing dependent Valve body material: Type 316 stainless steel
Valve trim material: Type 316 stainless steel
Temperature: 0 - 250 Degrees F (-32 - 121 C)

COMPLETE UNIT

Dimensions: 7.3 x 3.5 x 2.5
H x W x D
(inches)


Installation Drawing


Home |  About |  Help |  Shopping Cart


Hass Manufacturing Company
371 NY Highway 351, Averill Park, NY  12018  USA
Tel (518) 674-8151  Fax (518) 674-8157
www.hassmfg.com

Information subject to change without prior notice.

Copyright ©2017 Hass Manufacturing Company. All rights reserved.

#